PPI RAZOR GTR - Limited Production Supercar

PRESS RELEASE - PPI AUTOMOTIVE DESIGN

The Exclusive German Audi-tuner, PPI Automotive Design GmbH intensifies the fire and presents the special limited production Supercar, the PPI RAZOR GTR.

Following the introduction of the wildly successful PPI R8 RAZOR at last year’s Essen Motor Show, PPI Automotive Design GmbH have used all its knowledge from the past year in competition, closed road races, open road races, and research and development in the wind channel, autobahn and track testing, to create a truly inspired production car.  The Audi specialist turned its focus on optimising the power-to-weight ratio of the Audi R8 while simultaneously strengthening the motor, increasing performance, improving handling dynamics, and managing to reduce the weight of the Audi R8.

The essential part of the motor alteration is the incorporation of a specially engineered supercharger. In addition, a ram-charged sport air filter system and a high performance exhaust system made of stainless steel have been designed and added specifically to work in conjunction with the supercharger system. These components are precisely adjusted to each other with the help of a new ignition map for motor electronics.

The result, after this extensive modification, is a car with up to 580hp / 427 kW at 7,400 rpm, a maximum torque of 600 Nm at 6,200 rpm at its disposal, and a weight decrease of 250 kg over its serial counterpart (serial curb weight 1,580 kg).  Providing the PPI RAZOR GTR with the ability to achieve speeds from 0 to 100 km/h in only 3.7 seconds with a maximum top speed of 332 km/h.  This insures the proper performance to easily meet the demands of its motorsports and enthusiast clientele.

In addition to the excellent driving performance, this PPI Supercar also has a striking widebody appearance with elaborate, wind tunnel tested aerodynamics. Special attention was paid to the reduction of the vehicle’s weight, which was achieved by PPI’s extensive use of the extremely light and high-strength formula 1 and aerospace-proven Carbon Fibre. All parts are made of this high-tech material, reducing weight and adding strength in the process.

The PPI RAZOR GTR front bumper replaces the serial bumper and the new design in conjunction with a specially engineered front diffuser, reduces lifting forces at the front axle. Larger air inlets in connection with a new full LED-headlight unit present the two-seater with an even more athletic face.  More importantly, these air inlets feed the radiators with additional fresh air and channels through the new front hood to provide optimal cooling to the brake system. PPI sideskirts highlight the sporty profile of the GTR and also diffuses the airflow around the sides of the car for improved aerodynamic stability.

In order to perfectly balance out the down-force behaviour of the front-axle with the rear axle, PPI equips the RAZOR GTR with a special rear wing with an adjustable Gurney-flap. The motor cover, made of the light high-tech polycarbonate material Makrolon®, also has specially designed Carbon Fibre ram-charged air inlets that replace the heavy OEM Engine cover and aid in cooling, ensuring the consistent performance of the RAZOR GTR. Aiding in the engine cooling, are the newly designed side blades, rear fenders and rear bumper allow for additional motor bay and exhaust cooling that, in conjunction with the Carbon Fibre rear diffuser, optimises the airflow over and through the rear portion of this sharp performance car.

The overall appearance of the car is further enhanced by a new widebody skin to allow the PPI RAZOR GTR the proper structure to accommodate all the performance enhancements and wider wheels. The RAZOR GTR utilizes specially designed lightweight MAG9 Carbon Fiber forged aluminum PPI wheels.  At the front, 10Jx19 MAG9 wheels weighing 8.8kgs with 255/35 ZR 19 Michelin Pilot Sport 2 tyres are fitted and an impressive 12.0J x 20 MAG9 wheels weighing 10.0 kgs with 325/25 ZR 20 Michelin Pilot Sport 2 tyres are used at the rear.  This wheel and tyre-combination proves to be the optimal balance between comfort and control while maintaining proper road feedback for the driver.

PPI also developed a special high-performance braking system available only for the RAZOR GTR that can be identified by its metallic orange-coloured brake callipers. The optimal deceleration and perfect pedal pressure control is now achieved by enlarged 6-piston callipers in connection with extra-large discs measuring 380 x 36 millimetres at the front and 356 x 32 mm discs at the rear axle providing greater pad surface contact area and heat dissipation.

Nothing has been left untouched, as is evidenced by the new coil over kit developed in conjunction with technology partner KW Automotive GmbH.  This system has been specially adjusted to the needs of the PPI RAZOR GTR. And comes equipped with a Hydraulic Lift System, which can increase ground clearance by up to 45 millimetres if needed and therefore enables the driver to enter underground car parks or drive over speed bumps.

PPI completely re-designs the interior and turns the R8-interior into a “members-only” lounge with a motorsports flair. The serial interior is replaced by highest quality Onyx Nubuck-leather with orange-coloured accents and highlights. Additionally, PPI equips the limited edition RAZOR GTR with extensive Carbon Fibre throughout the cockpit; hand-brake lever, door sill protectors, Driver and Radio Console Surround, Door Trims, Center Console inserts, and kneepad trims, the ultra-light folding sport seats are also made of Carbon Fibre and bear the PPI “Sport Identity” style, following with the headliner, the steering wheel, shift knob, door panels and center console. The technical highlight of the interior is the ergonomically re-designed PPI sport steering wheel. Highlighting the exclusivity of this limited series production is PPI RAZOR GTR badging, threshold plates, and an aluminium production plaque framed by Carbon Fibre.  

Five black alloy temptations from Lorinser

PRESS RELEASE - LORINSER

As the days are getting longer, Mercedes and Smart drivers are only too happily tempted by the colour of the night: this is as Sportservice Lorinser is now also presenting a large share of its attractive light-alloy wheel collection in a fascinating dark look.

For example the single-piece Speedy (6.5x17 to 8.5x17 inch) designed for the Smart, shines with six diabolically brooding crescents in black paint. As a type MS light-alloy wheel it is also available in other dimensions, holes and bolt-hole patterns for Mercedes models (7x17 to 8.5x18 inch).

But even a Lorinser classic like the RS 8 (8.5x19 to 10x21 inch) equipped with turbine blades looks good in a dark complexion. In a mat black surface finish it mutates into a "steam roller” which literally merges with tyres and tarmac and cannot be stopped by anything in its march forwards.

The multipiece RSK 6 (8.5x18 to 10x19 inch) draws attention to itself with its large and unequalled presence: a gigantic, five-pointed, shining black centre is surrounded by a polished flange. The two diverse shades offer different charms in proportion to the silver version.

The massive yet elegant “body" of the RS 9 with the spectacular triple brace particularly comes into its own in the bicolour look: here centre and outside in silver come up against mat black interior walls. In addition the wheel shines in an undreamt range of dimensions from 8x18 to 10x22 inch.

Consequently, with the Speedy, MS, RS 8, RSK 6 and RS 9, Sportservice Lorinser presents five expressive alloy arrangements which would even turn people of highest morals to the dark side. Particularly as each of the five alloys has completely different nuances and accents in accordance with its own character, and small cars, limousines, estate cars, sports or off-road vehicles are tuned with the thrilling touch of the bad boy.

GEMBALLA TORNADO 750 GTS

PRESS RELEASE - GEMBALLA

There is only a little connection left between the GEMBALLA TORNADO 750 GTS and the Porsche Cayenne Turbo. At the most, the Porsche SUV is the master model for the latest development by the automobile manufacturer from Leonberg near Stuttgart. Already at first glance, the targeted goal of the technicians at GEMBALLA Automobiltechnik GmbH & Co. KG can be clearly defined: away from the SUV and more to an uncompromising sports car. The reason for the performed metamorphosis was the large amount of requests for a high performance sports car with the dimensions and the spacious interior of an SUV. 25 years of experience with innovative products based on Porsche sports cars contributed to the development of this new automobile. The unique signature of owner Uwe Gemballa is also clearly visible with the TORNADO 750 GTS:  750 hp and a vehicle weight reduced by 250 kg are only two unique selling points of this superb automobile. Once again, the company confirms its expertise when it comes to striking design and an especially powerful engine technology.

In order to meet the sports car´s increased requirements in terms of light construction and torsional stiffness, Uwe Gemballa´s team optimised nearly the entire auto body. For this reason, the ultra-strength and especially light material carbon is mainly used. A front apron extended by 60 millimetres with integrated aero lip generates more downthrust at the front axle and in connection with the also extended rear section it renders the typical elongated sports car look. Extensive air inlets suck in additional fresh air for the engine, oil- and air intercooler; and moreover, an air duct system even brings the air to the front brakes. On the other hand, the engine heat is effectively diverted by air ducts in the also newly designed bonnet. The special highlight of the bonnet is its fusion with the front wings and the new, converse opening mechanism. Compared to the serial Cayenne, the one-part bonnet-wing-unit now opens forward and therefore allows a better access to the engine.

The outstanding eye-catchers of the TORNADO flanks are the body extensions which are fitted all the way from the front to the rear. They make space for the extremely broad 12-inch rims and in connection with the new side skirts they render a dynamic look.

The aerodynamics specialists also extensively optimised the rear section. The rear skirt has been extended by 40 millimetres and for additional downthrust, a race diffuser has been added. A rear spoiler with carbon flaps perfects the aerodynamic overall package.

When designing the body kit, GEMBALLA does not leave any doubt that the TORNAGO 750 GTS is a full-blooded sports car. In order to emphasise this claim, GEMBALLA adds designer characteristics which are typical for sports cars: Round double tail lights and four end pipes of the high performance exhaust system which have been integrated in the rear skirt, confirm the powerful appearance.

On the one hand, the combination of the sport exhaust system, the sport catalysers and the optimised racing header render the sporty and earthy sound of the V8. On the other hand this is a substantial part of the profound modifications at the serial power engine of the Cayenne Turbo. But the main feature of the engine makeover is the increase of the cubic capacity up to five litres. Here, the GEMBALLA engine experts fitted fortified forged pistons, special connecting rods and racing turbochargers. An air intercooler with a 90 percent larger cooling area supplies enough cold air. All these components are precisely adjusted to each other with the help of new engine electronics maps.

The result: with a top performance of 750 hp / 552 kW at 6,400 rpm and a maximum torque of 1,050 Nm at 3200 rpm, the GEMBALLA engine meets the wishes of its ambitious customers from motor sports and also renders excellent performance values. The 4WD automobile accelerates from 0 to 100km/h in only 4.3 seconds and with a maximum velocity of over 300 km/h, the GEMBALLA TORNADO 750 GTS is significantly more powerful than its serial counterpart.

The TORNADO was equipped with an adjustable coilover kit which has been especially adjusted to the enormous performance potential. This allows lowering the car by up to 70 millimetres and therefore permits a variable adjustment of the setup to every individual driver and scope of use.

The right grip is provided by the tailor-made wheel-tyre combination for the GEMBALLA TORNADO 750 GTS: The multi-part, especially light GT SPORT forged rims are available in 12Jx22 with tyres measuring 335/25 Z 22.

By manufacturing the wheels in forged technology, they are extremely light. Moreover, the weight of the unsprung masses is reduced which significantly improves the handling as well as acceleration and braking response.

The high-performance braking system with the punched and slit XXL discs guarantees optimal deceleration values. In order to provide the perfect gas pedal response, the GEMBALLA technicians used 6-piston brake callipers with 420mm discs at the front axle and 4-piston brake callipers with 380mm discs at the rear axle.

As usual, GEMBALLA builds the interior in an unsurpassable quality and in an innovative design. The four single sports seats which offer all passengers a unique seating experience when driving winding roads are another highlight. The hand-holds which are embedded in the rear centre console provide further support.

The new front centre console with the lifted gearbox and the Data Control System renders a real cockpit feeling. The harmonically integrated display presents driving data such as acceleration, cross-acceleration and deceleration values. But also comfort is not neglected in the TORNADO: Stylish and in artisan perfection, GEMBALLA integrates state of the art Rear Seat Entertainment components and combines these with finest materials, such as high-quality leather, carbon fibre or aluminium.

HAMANN-IMPERATOR

PRESS RELEASE - HAMANN

All over the world, the company HAMANN-Motorsport is renowned for refining luxury cars. With the new programme for the Continental GT and Continental GT Speed by the English manufacturer Bentley, the company located in Laupheim once again confirms that it is the first choice when it comes to sportive accessories and breathtaking body design for luxury car models.

Sportive elegance is the hallmark of the HAMANN-IMPERATOR design: In order to meet the high expectations in its appearance and aerodynamics, the HAMANN -designers completely reconstructed the front of the four-seater. Larger air inlets in connection with perfectly integrated daytime running lights give the Bentley an even more dynamic face. Additionally, the newly designed front optimises the air flow and therefore reduces the lifting forces at the front axle. Impressive extensions at the front and rear wings broaden the IMPERATOR by 70 millimetres and are contribute significantly to the powerful overall impression of the HAMANN modification. The HAMANN side skirts were modelled in such a way that they calm the air flow at the sides and make the noble sports car look even lower and more elongated. In order to reduce the lifting forces at the rear axle, the HAMANN technicians fitted an elegant spoiler on the original boot lid of the Bentley and combined it with a diffuser rear skirt for additional downthrust.

Matching the striking appearance of the IMPERATOR, HAMANN uses new rims of the type ANNIVERSARY RACE ´´ANODIZED´´ in the dimension 22 inches. The exceptionally light, multi-part forged wheel has a high-gloss polished rim flange and a black anodized rim star. The recommended wheel/tyre combination for the front is 10.5Jx22 inches with tyres measuring 265/35 R 22. At the rear, 11.0Jx22 inch rims are used with tyres measuring 305/30 R 22. HAMANN even offers a 21-inch alternative. Under the designation DESIGN EDITION RACE ANODIZED the refiner offers an ultra-light forged wheel which unites sportiness and elegance in its design. The black rim star and the titanium bolts emphasise the dynamics of the wheel while the high-gloss polished rim flange confirms the noble look. HAMANN offers the 21-inch wheel with tyres sized 295/30 R 21.

The new aluminium wheels are especially put in the limelight with the special chassis springs which lower the centre of gravity of the Continental GT by 30 millimetres at the front and 20 at the rear axle. At the same time, the handling of the sports car is significantly enhanced.

With a powerful performance enhancement, HAMANN offers the core part of the refining programme. The upgrade includes a sports end muffler with oval stainless steel end pipes and a new engine management. The result for the Continental GT Speed engine is an extra output of approx. 40hp /29kW and a torque increase by 90 Newton metres. The aggregate of the Continental GT even improves by 70hp/52kW and advances its torque by an additional 90 Nm. In addition, the maximum speed for both engines rises by approx 5km/h compared to their serial counterparts.

An interior highlight is the ergonomically newly designed 3-spoke sport steering wheel. Due to its new shape it lies much better in the hand and still offers all functions of the serial steering wheel. In the HAMANN upholstery, the wheel is covered with most precious leather and enhanced with applications made of carbon fibre – this perfectly goes with the multi-part interior set made of same material. No matter if you are looking for black piano finish, leather or ultra-suede – we have everything that makes your heart beat faster. From the personalised floor mat set to a complete leather trim, everything is produced with artisan precision. Individually designed and fitted in the car by expert hand.

Driven by Sound!

PRESS RELEASE - EISENMANN

There is more than enough performance in the BMW X6M (E71 type) with 555 hp. The right sound to match that is now provided by Eisenmann, the expert when it comes to sport exhaust systems. The stainless steel system comes in two versions and roars out of four tail pipes.

The rear silencer punches through the rear spoiler of the brawny Bavarian with four massive tail pipes, each 83 millimetres or even 90 millimetres in diameter as an option. The beveled double-walled stainless steel tailpipes have a very racy look, step on the accelerator and you hear the typical beefy roar made by Eisenmann.

The Sport version of the rear silencer puts the legal specifications to the limit and passes the TÜV certification with a bellowing sound. The Race version with its four tailpipe system is designed for the race track and elevates the sound to a different level.

As usual, all rear silencers made by Eisenmann are hand-crafted and made of high-quality steel. The engineers at Eisenmann consider precision in workmanship as important as the flawless function of the flow-optimized muffler system. Furthermore, the top-notch design and of course the sporty sound are part of Eisenmann's trademark.